Selasa, 01 November 2016

Gas Storage Locker

Just tacked this together Friday 6th Feb, spent a few hours cutting the various bits and marking up the floor to get it right first time.


Tacked a top edge strip to allow the lid to sit against it.




Bent a bit of 50 x 4 around the seam to make the front of the lid.



Held it all in place with little tabs, then scriped and cut the lid to size
Corner to corner weld required.



The finished box,
very happy with it, exactly as per my original drawings.
the top seat will mirror it in reverse.



Related Posts by Categories

0 komentar:

 
About Boat Plans - Powered By Blogger