Jumat, 19 Juni 2015

Sheer Clamps on

Port side Sheer Clamp installed. Note Inner Stem also dry-fittedYesterday was fine and hot. Arlene and I were able to do a bit of work. We laminated the Sheer Clamp. is two pieces of Douglas Fir, 3/4" x about 1 1/2 ", laminated together along the line of the sheer (Mutti: thats the line along the top-most plank). Then they are taken off and put aside till the boat is planked and turned over,

Related Posts by Categories

0 komentar:

 
About Boat Plans - Powered By Blogger